Thread Guide, Yarn Guide, Wire Guide, Ceramic Rod, Ceramic Roller, Ceramic Wire Feed Roller, Ceramic Tube, Pigtail Guide, Dogtail Guide, Oiler Guide, Spin-finish Applicator, Birotor Guide, Travese Guide, Take-up Winder Guide, Open End Navel, Ceramic Eyelet, Ceramic Grooved Eyelet, Cut Eyelet, Slotted Eyelet, Double-Flanged Eyelet, Taper-bore Eyelet, Grooved Ring, Ceramic Ring, Ceramic Washer, Trap Guide, Tensor Cup, Deflector Bush, Deflector Guide, Ceramic Bush, Ceramic Nozzle, Accumulator Guide, Hook Guide, Pot Eyelet, Dumb-bell Guide, Ceramic washer, Ceramic Disc, Ceramic Plate, Ceramic Sleeve, Ceramic thread Guide, Ceramic Yarn Guide, Ceramic Oiling Nozzle, Slotted Tube, Low Friction Thread Guide, Alumina Thread Guide, Titania Thread guide, Conductive Titania Thread Guide, Zirconia Thread Guide, Alumina Ceramic, Titania Ceramic, Conductive Titania Ceramic, Zirconia Ceramic, Ceramic-Metal Assembly,
Frequently Asked Questions
Why does ‘Snow ‘form on the ceramic guides on our machines?
Snow formation occurs if the ceramic guide is abrading the yarn. The resulting powder collects on the guide surface. The causes are- wrong material selection, improper polishing, surface porosity, sharp edges in yarn contact area.

Why is the yarn filamenting and breaking (B.F.) on our machines?
This occurs when the ceramic guide surface has tiny cracks, sharp edges, pits, or pimples in the yarn contact area.

Why is the yarn slipping and looping in my winder?
The usual cause is too low roughness.

Why is the ceramic guide getting hot and damaging the yarn?
The usual causes are- wrong material selection, high friction and sticking due to non-optimal polishing.

What is your normal delivery time?
We have tooling of about 1200 different ceramic guides and other components. If the part is in stock, delivery time is 2-4 days. If not in stock, delivery will be in 4-6 weeks.

If a new part is to be made as per your design or sample, the delivery time for simple parts is 4-6 weeks, and for complicated parts it is 6-8 weeks.

Can you supply ceramic-metal assemblies (ceramic guides with their metal holders)?
Yes.

Can you supply moulded plastic parts for our machines?
Yes.